For those who prefer smaller cups!
RX Boobs is a big paddle balloon. Unlike RX Megaboobs, the shape of RXB is closer to classic heart but the «ears» are more prominent. There’re «nipples» on the top of each half.
Just like any other RX balloon, RXB are designed to be fully inflated without additional pre-stretching or pressure. One «ear» expands after another.
The balloon is made of natural latex only without synthetic rubber and powder fillers. Less additives means higher quality, stability and elasticity of a latex film.
The balloon is available in several crystal colors — blue, teal, pink, yellow.
RXB and all other giant paddle Roomtex balloons come powdered, not siliconized.
Straight to the sky!
RX Rocket is a gorgeous long zeppelin-like balloon with super smooth neck-to-body transition. The shape is close to RX 18'' flat balloons but much bigger — the nominal size is 180×60cm (70''x24'').
RX Rocket is made for pleasant riding and hugging. The latex is elastic and robust. The balloon is available in several crystal colors.
The first SPH balloon ever!
Once the balloon is blown up right there’s a tunnel on the top of it that can be used for a naughty purpose. The nominal balloon size is 30'' — and the bigger the balloon the tighter the hole!
This is the «Regular»» version of RXHL — wider hole for those who prefers friction over pressure. «Tight» version with the narrower hole is available here.
Lubricants are strongly advised but not the oil-based ones since they dissolve the latex.
The instruction for the proper inflation of RXHL is on the last picture.
This is the «Tight» version of RXHL — smaller hole (like on Geo balloons) for those who prefers greater pressure and resistance. «Regular» version with the wider hole is available here.
Huge blimp balloons from Roomtex!
The size of RXB is between GL900 and GL1200 — shorter than GL1200, longer than GL900 and a bit wider than both. The shape is slightly more roundish and less «rectangular». The nominal size is 180×80cm (70'''x30'')
The bead part of the balloon is narrowed to fit L size clips and valves.
RXB is available in one color — crystal pink.
These balloons may have the lighter stripes along the rim of the paddle mold — it’s a normal thing and not a defect.
Roomtex lloD is like Doll, but lloD.
Unlike the Cattex/CZnF Dolls the valve is located on the «head» part of our balloon. The size is close to the Cattex Doll, just a bit wider. The nominal size is 180×80cm (70''x30'')
RXlloD and all other giant paddle Roomtex balloons come powdered, not siliconized.
Few years ago Val glued together Cattex 36'' and GL500 to make «The Frankenloon» that was gloriously btp’d by Oxana in one of Playground videos. That was epic.
Now we recreated this shape as a brand new Roomtex 36'' Longneck balloon!
Just like the prototype, RX36L is a huge paddle balloon. It can reach the length around 2m/78'', and more than a half of its length belongs to the enormous fat neck!
You don’t need to do tricks to have the neck fully inflated — just keep pumping until the neck is big and tight.
RX36L and all other giant paddle Roomtex balloons come powdered, not siliconized.
Nearly impossible giant double-chamber latex insanity!
I designed RXMB as a boobs-like balloon — If you underinflate it you would see the «nipple». But if you blow it up tight it would mostly look like two GL balloons joined together! :)
The special design makes both «boobs» inflate easily — just keep pumping and watch the «boobs» inflating normally one after another. No prestretching is required.
These balloons may have the lighter stripes along the rim of the paddle mold — it’s a normal thing and not a defect. We’re working on making them less visible in next batches.
RXMB and all other giant paddle Roomtex balloons come powdered, not siliconized.
Please note: due to the nature of all balloons with massive negative curves (heart, mouse etc) RXMB might sometimes behave unpredictably in terms of spontaneous pops. If this balloon pops early during inflation don't hesitate to contact us for the hassle free refund or replacement.
We’re happy to introduce the third generation of Roomtex balloons and our best balloons so far — Roomtex 24''!
Does this shape look familiar? It took half year to recreate size and proportions of one legendary but discontinued balloon that we all love and admire. And we succeeded! This shape is easily recognizable — it’s the biggest balloon ever made on a round mold.
Of course we went further than just recreating the shape.
First, we extended the neck a bit and made is slightly softer than the main body. Longer neck that is easier to gain — that’s what I’m talking about.
Second, we developed the special blend of high quality latex to find our perfect balance between durability, softness and elasticity. These balloons feel a bit softer and stretch a bit more than original Q24. Bit just a bit. And yes, they are really strong.
That’s what make Roomtex 24'' special. It’s not a copy. It’s a Roomtex balloon inspired by looners’ passion to something that we all dearly miss.
Roomtex 24'' are available in 7 soft crystal colors.
This is the special version of our bestseller RX24 balloons. We focused on latex softness and elasticity so these RX24S are the softest balloons we’ve produced so far. They are 1.6 times thinner and softer than regular RX24.
These balloons are made for looners who love balloons that look and feel more fragile than regular ones and bring special excitement with every touch.
We found a good balance between softness and stability — RX24S are way not as frail as they look:) Of course, regular RX24 has greater durability but RX24S won’t give up easily.
Thinner latex means more delicate colors — RX24S balloons are more transparent than regular ones so the colors are as soft as the latex!
Thanks to softness, RX24S has greater overinflation potential — we got the balloons up to 190cm long during test inflations. You don’t need any tricks to get a full neck — just keep pumping until it’s full, the balloon will still be far from its limit.
Some balloons come siliconized (may be stuck inside, easy to unstick), the newer ones come powdered (without sticking together)
Why having only one balloon neck when you can get two? :)
We used the RX22d mold and just didn’t make the second inlet. The result is quite unusual — a balloon that can get two «necks» on both poles!
Of course, you should inflate it tightly to get both «necks». Or just ride it well — it’s still a pretty robust loon!
A limited run of RX22k balloons are available now in our signature crystal colors.
JULY 22nd UPDATE: current version of valves is Mark 24. New composite membrane unit provides increased air tightness (98-100%). L and XL valves come with thicker red fixing loop for lower balloon neck stress
The best way to enjoy blowing huge necky balloons without having sore fingers is to use a valve! However, there’s no good stock ones available so I asked Val to develop a valve for me.
8 years of development and testing brought you this perfect Roomtex Balloon Valve. Simple, reliable, convenient and designed for one and only purpose — blowing balloons with long necks.
Air tightness (95–99%) is provided by thick semi-free PVC membrane. It can hold any pressure inside balloon and provide low resistance to direct air flow. You can open the membrane with your finger if you decide to let the air out.
Balloon neck is fixed on a valve with the combination of a fixing rim and a soft loop. Balloon nozzle is pulled on a rim and the loop is put on a balloon neck behind the rim. When balloon expands the swollen neck push and press the loop to the rim and doesn’t let balloon to slip away. No additional fixing or taping is needed.
This way of holding balloon on a valve provides you as much balloon neck as possible. It means that you will be able to blow the hugest balloon necks in your life! With TTR Balloon Valve you will know the real limit of any balloon;)
Roomtex Balloon Valves are available in two sizes: with M rim (60mm/2.5'' diameter), L rim (90mm/3.5'' diameter) and XL rim (90mm/5.5'' diameter).
M sized valve is perfect for the balloons with medium neck width — Qualatex 24'', Roomtex 25'' Longneck (new, 1pc), Roomtex 30''x40'' (new, 1pc), Roomtex 22'' double (new, 1pc), Olympic 25''/45'', Cattex 36'' Longneck, 18' stuffer balloons etc.
L sized valve is designed for the balloons with wide necks — South America 36'', Cattex 32'' Longneck, GL1200 etc.
XL sized valve is designed for the balloons with extremely wide necks — Cattex 55'',63'', 72'' etc. (except climb-ins)
The valve's rim is covered with protective film - remove it before use.
This is a third version of highly demanded Roomtex 18'' balloons — sweet elongated paddle loons inspired by old-time blimps. Comfy for riding and exciting for blowing!
Version 23is made on the new molds that provide higher quality. greater durability and slightly smaller size comparing to the previous version.
The balloon is available in soft crystal colors.
Roomtex 25'' Longneck is a big 6-fluted balloon. The complex shape is designed to maximize the neck length. Yes, the neck of these balloon is long, fat and easy to acquire!
The latex is relatively thick, durable and stretchy.
Roomtex is TTR balloon brand. It means that all Roomtex balloons are designed and crafted solely by TTR team. We’ve been working on them for 2 years and proud to present these loons to looners.
Roomtex 30''x40'' is a big 6-fluted blimp balloon inspired by old-time Sri-Lanka zeppelin loons. The size is a bit smaller than GL800 so it’s perfect for comfortable and exciting ride!
Roomtex 22'' double is a unique round 6-fluted balloon with two inlets. It’s made for two so if you have a partner who is ready to share this balloon with you this fun will be extremely exciting!
Please note that the current stock is limited so it may take several days to produce more balloons.
Imperfect but worthy!
These balloons have defects that may affect their durability or just don’t look nice (thin spots, uneven coloring, wavy latex etc). Low chance of pinholes — all balloons are checked for them but there might be some weak spots that could turn into pinhole during inflation.
We use them for TTR shootings and 8 of 10 perform just as good as normal balloons. Perfect for the big popping sessions.
These balloons are offered with 75% discount — 4 balloons for the price of 1 in one lot. Even considering a chance of significant defect it’s quite a bargain.
You can choose the balloon type; random colors are shipped. The current stock is approximate.
Please note that we don’t accept any reclamations regarding quality of the second quality balloons so you buy them at your own risk.
Third edition of legendary TTR Boobie! This time she tried a sailor’s uniform and it fits her perfectly!
Just like her sisters, this Boobie is made of 0,4mm PVC; 8 chambers with double valves; perfect overlapping seams. Shiny PVC and SPHs are optional.
The toy is available in 3 sizes — 2m (6’7''), 2,5m (8’3''), 3m (9’10''). Basic priсe is for 2m (6’7'') matte 0,4mm PVC toy. SPH (love hole) is optional.
NOTE: production and delivery takes up to 30 days after full payment. The tracking number will be provided when your toy is ready and shipped to your address.
Shipping via DHL Express (2–5 days)
It took one year and efforts of five extraordinary people from different countries to make a balloon we are proud of. The design that I would proudly treat as a part of our legacy when we open the last Room.
This project is about nothing but best.
The art is created by famous Japanese artist Banfuumaru. It is based on my long-time dream of having a balloon like that and a reference photo we’ve made for it.
Perfect art requires a perfect canvas. Belbal (Belgium) supplied us with the brand new soft crystal 24'' balloons.
But all these efforts could be still not enough if our complex art won’t be transferred to balloon properly. That’s why we asked for help the most skilled and recognized master of custom balloon printing — Luka Tourneflot from France. The job was done on a highest level possible providing the incredible quality and clarity.
This extraordinary project was done with love, passion and exceptional craftsmanship of looners from different parts of the world.
We have a very limited stock of these balloons for sale.
Each order comes with a signed postcard with a photo of me that was used as a reference for the Banfuumaru’s art.
Perfect art requires a perfect canvas. Crystal Tuftex 17'' balloons were provided by Balloons-United (Germany).
If this balloon had a wider neck you could climb into it easily. But it has a regular neck. And a fancy Room 22 design that makes it one of a kind.
The naughty stepsister of TTR Boobie! Tanned, purple haired, nearly naked and ready to fulfil your most secret wishes;)
3 SPHs (love holes) are located in her mouth, butt and groin. Yeah this baby is up for any dirty fantasy!
Naughty Boobie is as big as her shy sister. She is made of robust 0,4mm PVC and has 8 chambers (body, head, 2 boobs, 2 arms and 2 legs) with convenient double valves for faster inflation and deflation.
The Boobie on the photo is first prototype. We made several corrections — improved the boobs (the valve is a nipple now) and relocated the rear SPHs closer to back and belly so they were more convenient to use (the «anatomic» position is badly accessible when the legs are fully inflated).
Get ready for a new level of fetish fun! ;)
The toy is available in 3 sizes — 2m (6'7''), 2,5m (8'3''), 3m (9'10'') and two designs — pink and purple. Basic priсe is for 2m (6'7'') matte 0,4mm PVC toy. SPH (love hole) is optional.
A perfect flashback from the Room 11 with gorgeous Katya De-Milo. We signed several Q24RH that time. Most of them are sold but I found one left. It’s Q24, with our signature design plus it is signed and kissed by both me and Katya! Really worthy item. The balloon is unused, never inflated.
GLs are synonymous to seduction. Custom GL700 from Seduction Room is a pure essence of my attraction to these amazing balloons.
Painted with latex paint. Used in the Seduction Room.
A signed photo from us ☺ Random picture from one of TTR Rooms, you may pick the genre (balloons or inflatables).
A postcard is free and comes with any tangible TTR order. If you would like to get a TTR postcard only you pay shipping costs ($4.99)
Barbie for little girls, Boobie for big boys! ;)
Our brand new custom toy is here! Just look in her big eyes! I said — EYES!
Okay, you can check her boobs too. Now you know why I call her Boobie lol. And if you are into juicy butts she has a perfect one too!
And the best thing about Boobie is that she is made for pleasure and can’t say «no» ;) And she doesn’t take much space when deflated.
In terms of numbers — TTR Boobie is a BIG inflatable toy made of soft yet durable 0,4mm PVC; 8 chambers with double valves; perfect overlapping seams.
Boobie waits for you honey:-)
Our first full custom inflatable designed exclusively for TTR! It’s a Pony from our kinky universe — grown up, curvy and eager to have some sexy fun! ;)
0,4mm shiny PVC with strong seams. 9 chambers with very handy double valves — you might see how fast we deflated it in the Room 11 Session 1.
Me and Val designed this toy specially for TTR. It is based on an inflatable designed by Mothkyn with some extra kinky touch from us;) So now this toy is as great as we expected! It’s a pure naughtiness sculpted from 0,4mm transparent PVC with a sexy custom print.
NOTE: production and delivery takes up to 30 days after full payment. The tracking number will be provided when your toy is ready and shipped to your address
Worldwide shipping via DHL Express (2–5 days)
Credits: Mothkyn_Productions http://www.furaffinity.net/journal/9381434/
2,5 meter custom made inflatable toy. 7 compartments, 0,4mm soft and durable PVC. Due to it’s shapes and curves this toy brings extraordinary joy of riding and bouncing. SPF (love hole) is optional.
NOTE: production and delivery takes up to 30 days. The tracking number will be provided when your toy is ready and shipped to your address.
Shipping via DHL Express $99
Balloon and Inflatable video
This website is protected copyright. No part of this website may be reproduced, stored in a retrieval system, or transmitted in any forms or by any means without the written permission of the copyright owner.
All rights reserved © 2016-2022
All of the models depicted in this website were over 18 years of age at the time of the photography.
Unfortunately no orders can be accepted right now.
Sorry for the inconvenience!