Huge blimp balloons from Roomtex!
The size of RXB is between GL900 and GL1200 — shorter than GL1200, longer than GL900 and a bit wider than both. The shape is slightly more roundish and less «rectangular». The nominal size is 180×80cm (70'''x30'')
The bead part of the balloon is narrowed to fit L size clips and valves.
RXB is available in one color — crystal pink.
These balloons may have the lighter stripes along the rim of the paddle mold — it’s a normal thing and not a defect.
RXB and all other giant paddle Roomtex balloons come powdered, not siliconized.
Roomtex lloD is like Doll, but lloD.
Unlike the Cattex/CZnF Dolls the valve is located on the «head» part of our balloon. The size is close to the Cattex Doll, just a bit wider. The nominal size is 180×80cm (70''x30'')
RXlloD and all other giant paddle Roomtex balloons come powdered, not siliconized.
Few years ago Val glued together Cattex 36'' and GL500 to make «The Frankenloon» that was gloriously btp’d by Oxana in one of Playground videos. That was epic.
Now we recreated this shape as a brand new Roomtex 36'' Longneck balloon!
Just like the prototype, RX36L is a huge paddle balloon. It can reach the length around 2m/78'', and more than a half of its length belongs to the enormous fat neck!
You don’t need to do tricks to have the neck fully inflated — just keep pumping until the neck is big and tight.
RX36L and all other giant paddle Roomtex balloons come powdered, not siliconized.
Nearly impossible giant double-chamber latex insanity!
I designed RXMB as a boobs-like balloon — If you underinflate it you would see the «nipple». But if you blow it up tight it would mostly look like two GL balloons joined together! :)
The special design makes both «boobs» inflate easily — just keep pumping and watch the «boobs» inflating normally one after another. No prestretching is required.
These balloons may have the lighter stripes along the rim of the paddle mold — it’s a normal thing and not a defect. We’re working on making them less visible in next batches.
RXMB and all other giant paddle Roomtex balloons come powdered, not siliconized.
Please note: due to the nature of all balloons with massive negative curves (heart, mouse etc) RXMB might sometimes behave unpredictably in terms of spontaneous pops. If this balloon pops early during inflation don't hesitate to contact us for the hassle free refund or replacement.
Hot balloons with the frosty kisses of winter!
White swirls go all over the balloon and underline its transparency. The lines will stay opaque even on the overinflated balloon and will make the gorgeous shape of Roomtex 24'' even more perceptible. Watching the stripes expanding as the balloon neck is getting bigger during riding or inflating brings the excitement to a whole new level.
All signature features of Roomtex 24'' balloons with the unique hand drawn pattern.
We’re happy to introduce the third generation of Roomtex balloons and our best balloons so far — Roomtex 24''!
Does this shape look familiar? It took half year to recreate size and proportions of one legendary but discontinued balloon that we all love and admire. And we succeeded! This shape is easily recognizable — it’s the biggest balloon ever made on a round mold.
Of course we went further than just recreating the shape.
First, we extended the neck a bit and made is slightly softer than the main body. Longer neck that is easier to gain — that’s what I’m talking about.
Second, we developed the special blend of high quality latex to find our perfect balance between durability, softness and elasticity. These balloons feel a bit softer and stretch a bit more than original Q24. Bit just a bit. And yes, they are really strong.
That’s what make Roomtex 24'' special. It’s not a copy. It’s a Roomtex balloon inspired by looners’ passion to something that we all dearly miss.
Roomtex 24'' are available in 7 soft crystal colors.
This is the special version of our bestseller RX24 balloons. We focused on latex softness and elasticity so these RX24S are the softest balloons we’ve produced so far. They are 1.6 times thinner and softer than regular RX24.
These balloons are made for looners who love balloons that look and feel more fragile than regular ones and bring special excitement with every touch.
We found a good balance between softness and stability — RX24S are way not as frail as they look:) Of course, regular RX24 has greater durability but RX24S won’t give up easily.
Thinner latex means more delicate colors — RX24S balloons are more transparent than regular ones so the colors are as soft as the latex!
Thanks to softness, RX24S has greater overinflation potential — we got the balloons up to 190cm long during test inflations. You don’t need any tricks to get a full neck — just keep pumping until it’s full, the balloon will still be far from its limit.
Since different latex blends performs a bit differently, RX24S are 1.6 times softer that their regular twins. For example, pink RX24S is 1.6 softer than pink RX24 but it still can be comparable with regular blue RX24 because blue ones are softer. And the blue RX24S are very soft:) I hope you got my point.
Why having only one balloon neck when you can get two? :)
We used the RX22d mold and just didn’t make the second inlet. The result is quite unusual — a balloon that can get two «necks» on both poles!
Of course, you should inflate it tightly to get both «necks». Or just ride it well — it’s still a pretty robust loon!
A limited run of RX22k balloons are available now in our signature crystal colors.
This is a second version of highly demanded Roomtex 18'' balloons — sweet elongated paddle loons inspired by old-time blimps. Comfy for riding and exciting for blowing!
Version 2 is made on the new molds that provide higher quality, greater durability and slightly larger size comparing to the previous version.
The balloon is available in soft crystal colors.
Roomtex 25'' Longneck is a big 6-fluted balloon. The complex shape is designed to maximize the neck length. Yes, the neck of these balloon is long, fat and easy to acquire!
The latex is relatively thick, durable and stretchy.
Roomtex is TTR balloon brand. It means that all Roomtex balloons are designed and crafted solely by TTR team. We’ve been working on them for 2 years and proud to present these loons to looners.
Roomtex 30''x40'' is a big 6-fluted blimp balloon inspired by old-time Sri-Lanka zeppelin loons. The size is a bit smaller than GL800 so it’s perfect for comfortable and exciting ride!
Roomtex 22'' double is a unique round 6-fluted balloon with two inlets. It’s made for two so if you have a partner who is ready to share this balloon with you this fun will be extremely exciting!
Please note that the current stock is limited so it may take several days to produce more balloons.
Imperfect but worthy!
These balloons have defects that may affect their durability or just don’t look nice (thin spots, uneven coloring, wavy latex etc). Low chance of pinholes — all balloons are checked for them but there might be some weak spots that could turn into pinhole during inflation.
We use them for TTR shootings and 8 of 10 perform just as good as normal balloons. Perfect for the big popping sessions.
These balloons are offered with 75% discount — 4 balloons for the price of 1 in one lot. Even considering a chance of significant defect it’s quite a bargain.
You can choose the balloon type; random colors are shipped. The current stock is approximate.
Please note that we don’t accept any reclamations regarding quality of the second quality balloons so you buy them at your own risk.
Huge round balloon and the biggest one we ever printed before! White round «Celebrate Love» print looks awesome on this balloon that can easily reach 2 meters in diameter.
We printed only three balloons of this type so it’s a very limited run.
CELEBRATE LOVE is our special print dedicated to Room 33!
That’s exactly what we have been doing for all these years — celebrating our love for balloons! Our tastes and vision may vary but we all are looners and we share our kinky yet sweet latex passion!
Single sided dark blue or pink print on clear Everts 18'' balloons. These durable Malaysian stuffer balloons are made of stretchy latex and can build big fat neck easily!
Designed and printed solely by TTR team.
CELEBRATE LOVE design is also available on several other types of balloons.
Third edition of legendary TTR Boobie! This time she tried a sailor’s uniform and it fits her perfectly!
Just like her sisters, this Boobie is made of 0,4mm PVC; 8 chambers with double valves; perfect overlapping seams. Shiny PVC and SPHs are optional.
The toy is available in 3 sizes — 2m (6’7''), 2,5m (8’3''), 3m (9’10''). Basic priсe is for 2m (6’7'') matte 0,4mm PVC toy. SPH (love hole) is optional.
NOTE: production and delivery takes up to 30 days after full payment. The tracking number will be provided when your toy is ready and shipped to your address.
Shipping via DHL Express (2–5 days)
Balloon and Inflatable video
This website is protected copyright. No part of this website may be reproduced, stored in a retrieval system, or transmitted in any forms or by any means without the written permission of the copyright owner.
All right reserved © 2016-2022
All of the models depicted in this website were over 18 years of age at the time of the photography.